Typically, the majority of lighting on signposts and bollards are continually on throughout the day and night. Take the 'Keep Left' bollard on a traffic island, by powering the bollard through a Reflect Relay the bollard will turn off during the day, saving on average over a year, twelve hours of energy per day. Flexible in application, the Reflect Relay can also be used to extend the switching capability of any switching device whether that extension is as an extra output, a volt-free signal or to add additional switching power. Small in size, retrofittable in minutes and without changing any wiring at the photocell makes the Reflect Relay install simple, safe and cost-effective.


  • Operating Voltage: 175 to 300 Vac
  • Operating Temperature: -25°C to +75°C
  • Power consumption:
  • IP / NEMA Rating: IP20 (outside of Trojan)
  • Body Material: Plastic Flame retardant UL 94V0 material
  • Max 2 x 2.5mm2 solid or stranded wire entry
  • Top hat 35mm din rail or surface mounting

Contact Data

  • Configuration:1 Normally Open
  • Rated current: 12A
  • Contact material: AgNi 90/10
  • Max breaking capacity: 3000V
  • Operate Time Max: 8ms
  • Mechanical Endurance: 10 x 10^6 ops
  • Insulation between open relay contacts: 1000 Vrms


  • Surface mount option

Related ArticlesRelated Articles

Dimensions and SpecificationDimensions and Specification

Reflect Relay
Height (H)
Width (W) 86.7mm
Depth (D) 17.5mm

Case study showcaseCase study showcase

Effective street lighting plays an important role in keeping streets and roads safe for drivers and pedestrians alike. Take a look at our range of case studies to see how Lucy Zodion have supplied a wide range of street lighting solutions.